Advanced Portable Ultrasonic Flaw Detector

Portable Ultrasonic Flaw Detector 1.Advanced digital detector 2.Big memory 3.RS232/USB port 3.Li battery power

Advanced Portable Ultrasonic Flaw Detector

Introduction:

  

The ultrasonic flaw detector is the portable  industrial non-destructive flaw detector, which can rapidly, easily and accurately inspect, locate, evaluate and diagnose various defects crack, inclusion and pinhole, etc.) in a workpiece without destruction.t can be used both in a lab and field. The instrument can be widely used in any fields that need defect inspection and quality controlling e.g. manufacturing industry, iron & steel metallurgical industry, metalworking, chemical industry, etc.,also be broadly used in the active safety inspection and service-life evaluation in such fields as aerospace, railway transportation and boiler pressure vessels, etc.

The ultrasonic flaw detector is an essential instrument for non-destructive inspection industry.

Basic working principle

Performance Features

1.Automated calibration of transducer Zero Offset and/or Velocity

2.Automated gain,Peak Hold and Peak Memory

3.Automated display precise flaw location(Depth d,level p,distance s,amplitude,sz dB,)

4.Automated switch three staff gauge ((Depth d,level p,distance s)

5.Ten independence setup, any criterion can be input freely, we can work in the scene without test block

6.Big memory of 300 A graph and 30000 thickness value.

7.Gate and DAC alarm; Acoustic-Optical alarm;

8.RS232 port,communication with pc is easy

9.The embeded software can be online updated

10.Li battery, continue working time up to 7 hour

Technical Parameters

Designation	Technical Data
Range of scanning (mm)	Range of scanning (mm): 0~10000 Steps: 2.5,5,10,20, 30,40,50,60,70,80,90, 100,150,200, 250, 300, 350, 400, 450,500,600,700,800,900,1000,2000,3000,4000,5000,6000,7000,8000, 10000 Adjusting step: 0.1mm(2.5 mm~99.9mm),1mm(100mm~10000mm)
MTLVEL(m/s)	MTLVEL: 1000~15000 7 fixed levels: 2260,2730,3080,3230,4700,5920,6300,12000 Adjusting steps: 1
Working mode	Single probe (receiving and sending), double probe (one for receiving and another for sending), transmission (transmission probe)
Frequency Range (MHz)	0.5–15
Gain adjustment (dB)	0~110 Adjusting step: 0.0,0.2,0.5,1,2,6,12
Vertical linear error	Vertical linear error is not more than 3%
Horizontal linear error	Not more than 0.2% in the scanning range
Sensitivity Leavings	≥62 dB
Dynamic range	≥34dB
Display	Display: high-brightness graphic lattice
A-Scan display area	Full screen or local A-Scan display freezing and de-freezing A-Scan filling
Data save	300 A-Scan images (including setting of instrument) 30000 values of thickness (300 sets)
Standard communication interface with PC	RS232/USB
Measuring unit	mm/inch
Battery	Li battery 7.4V 4800mAh
Power adaptor	Input 100V~240V/50Hz~60Hz Output 9VDC/1.5A
Working temperature	-10°C~40°C
Working humidity	20%~90%